The UniSat is the ideal equipment for operators of low and medium voltage networks, who want a small, cost-effective but nevertheless efficient and universal fault location system. Its small dimensions permit it to be integrated into small, mobile vehicles (eg. VWT4, Renault Rapid, etc.). Occurring cable faults in power distribution networks, even in areas with limited accessibility, can be located simply and quickly and with great accuracy, with this system.
The Module SPG 32 contains all the high voltage components, as well as the control and security circuits of the UniSat system.
It produces the direct voltage necessary for the cable test according to DIN VDE 0276-620 and 621 and also the required surge voltage for the pinpointed accoustic location up to 32 kV maximum.
All necessary features to conduct short-term arc reflectionmethod, the current pulse procedure and the voltage uncoupling method are installed on the high voltage module.
The integrated 5 kV direct voltage source serves the sheath tester according to DIN VDE 0276-620 and 621 and also the sheath fault location.
By aid of the digital reflectometer Kabellux 31-E, cable fault prelocation by direct, comparitive and differential measurement, as well as the arc reflection method, current impulse method and voltage uncoupling is possible.:
Scope of supply:
- High voltage module SPG 32
- Reflectometer Kabellux2 31-E alternatively T3050
- Shock wave receiver Digiphone (inductiv/accoustic)
- Control panel with security devices and integrated high voltage switch HSS 32
- Cable drum module with:
- high voltage cable (50 kV) 25m
- line cord 25m
- grounding cable 35m
- Emergency off – switch NAG
- Discharge rod 35 kV EST 35
Optional:
- Cable drum for reflection measurements in three phases
- Device cubicles
|
Current exibitions
