HPA 100 AC
HPA 130 DC (with optional rectifier HGL 130)
High Voltage Test System
Control instrument
The control instruments HSG 10 - 1 is used for controlling the high voltage transformers of the type HTR 100.
It consists of a variac, test meters for measuring the current and high voltage, operational components for the high voltage spark gap, a timer for the test duration and safety circuit.
Transformer
The low voltage winding can be supplied continuously from zero to the maximum value of the HSG 10-1 so that a certain output is available for a pre-determined period. The operating duration depends on the application ranging from a few minutes to continuous operation.
The test transformer is single pole insulated and is mounted in a insulated cylinder with top and bottom flanges. The insulation material is primarily oil impregnated paper.
Control Unit HSG 10 - 1 Output | 5 kVA | Short term output (1h) | 10 kVA | Primary voltage | 220 V | Outgoing voltage | 0 … 250 V | kV-Measuring range
(alternative) | 50 / 100 / 150 kV | Dimensions | 520 x 430 x 465 mm | Weight | 75 kg |
Transformer HTR 100 Rated voltage | 100 kV AC
130 kV DC with opt. rectifier | Continuous output | 5 kVA | Rated current | 50 mA | Short circuit output | 10 kVA | Frequency | 50 Hz or 60 Hz | Short circuit voltage | approx. 5 % | PD at rated voltage | > 1 pC | Weight | approx. 225 kg |
Comparison with other models |
Current exibitions
