It is very difficult to locate a fault or a cable end inn a branched network by TDR measurement. The Echo Pulser marks a certain point in the network thus enabling the user to locate and identify this point by means of a TDR easily.
The marked connection point in the network is easily to distinguish with a suitable reflectometer.
The impulse reflections of the joints / branches on the TDR`s display have no influence on the measurement.the installed cable length and ist correct connection between the Echo Pulser and the TDR is proofed. Other cable length of the cable network are measured by connecting the reflectometer to the remaining branches. Other cable length of the cable network are measured by connecting the reflectometer to the remaing branches.
Faulty cable lines are detected the same way. Repair works do only need a disconnection of damaged cable instead of the whole network.
Performance features:
- The Echo Pulser generates a clear signal for the time domain reflection measurement
- The Echo Pulser can be connected to live cables
- The connection and operation of the Echo Pulser does not influence the network`s operation
- Touch proofed contacts and clamps allow the secure connection to live cables
- Handy and easy in its operation
- Acoustinc and visual (LED) control of the Echo Pulser`s operation
- Battery control
- Automatic identifiction and signing of cable voltages bigger than 42 V
- The Echo Pulser is easily connected to sockets, bus, bars, clamps.....
- Calibration
Scope of delivery:
- Echo Pulser
- Leads and connection clamps
- Battery 9 V block
- Users Manual
Accessory:
Adapter for coaxial cable Article No. 900 1699
(Other adapter on request) |
Current exibitions